£1,220.00 – £1,255.00
Do you have a question about this product? Click here to ask
This product comes with FREE Delivery & all orders over £99 ex Vat.
Buy in confidence with us. We are an approved Stihl Main Dealer.
Share this product to someone who might like it
The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.
As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away – even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.
This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed – even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.
The HD2 filter is made from polyethylene filter material with up to 70% finer pores than fleece and polyamide filters to trap even very fine dust. In addition, it is oil and water-repellent and thus very easy to clean. The PET-covered filter cartridge with quick-release lock enables the filter to be assembled and disassembled in next to no time, without using tools.
1-in-4 channel technology. The economical STIHL 2-MIX engine with 1-in-4channel technology features a high torque over a wide speed range. The chainsaw provides fuel savings of up to 20% compared to STIHL two-stroke engines in the same performance class without 2-MIX technology. Exhaust emissions are reduced by up to 50%.
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn’t need to be cleaned until an appreciable drop in power occurs.
When changing the cutting attachment, you will not risk losing the nuts on the sprocket. The MS 261 is the first STIHL chainsaw to be equipped with the captive nuts. A great advantage for all users.
Allows a precise, demand-based delivery of oil. It’s possible to reduce oil production by up to 50% in the E position. For very long cutting attachments or very dry wood, an additional volume of oil can be added by the user. similar to illustration.
The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.
The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50%.
STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user’s joints and muscles through a spring or rubber element in the starter handle.
Special catches on the fuel and oil tanks for easy opening and locking without the need for tools.
|Power output kW/bhp||5.4/7.3|
|Weight kg 1)||7.4-7.5|
|Power-to-weight ratio kg/kW||1.4|
|Sound pressure level dB(A) 2)||105|
|STIHL Oilomatic saw chain pitch/type||3/8″ RS|
|Sound power level dB(A) 2)||118|
|Vibration values left/right m/s² 3)||6.9/5.6|
|Tank volume l||0.85|
|Speed at maximum power Um||9.500|
|Bumper spike||Steel claw|
|Sprocket – number of teeth||7.7 Z|
|Sprocket||Chain sprocket,Ring sprocket|
|Chain tensioning||Lateral chain tensioning,Side chain tension|
|Anti vibration system||Standard AV-System|
|Handle type||Standard grip|
|Filler cap||Tool free filler cap|
|EPA Certified fuel consumption glh||0.751|
|EPA Certified fuel consumption l/h||2.841|
|Oil tank volume cm3||400|
1) Without fuel, without bar and chain
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
Side chain tension
|Oil Tank Volume||
The reviews you see here are written by us and our customers. As we have a physical store based here in Felthorpe, Norfolk, we deal with the public face to face daily.
Some of our customers that are not able to log onto our website and add a review for themselves still have plenty to say about our products and service.
We place only reviews to the products that have been honestly reviewed by our customers for the product that they have purchased.