£304.17 ex.VAT £365.00 Inc.VAT
Do you have a question about this product? Click here to ask
This product comes with FREE Delivery & all orders over £99 ex Vat.
Buy in confidence with us. We are an approved Stihl Main Dealer.
Share this product to someone who might like it
For working on areas of tough grass
Easy to start brushcutter for working on areas of tough grass. Multifunction controls, bike handle, STIHL 2-MIX engine, straight shaft, single strap harness, AutoCut mowing head.Comes standard with fully adjustable bike handle and AutoCut line head.
Extend your domestic warranty from 2 to 3 years with the purchase of 5 litres of STIHL MotoMix® fuel and this product. Your STIHL Approved Dealer will register your extended warranty on the STIHL warranty database at point of purchase.
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.
For use with loop handle machines.
|Power output hp||1.1|
|Weight kg 1)||5.2|
|Sound pressure level with plastic tool dB(A) 2)||93|
|Sound pressure level with metal tool dB(A) 2)||94|
|Sound power level dB(A) 2)||108|
|Sound power level with metal tool dB(A) 2)||107|
|Vibration value, left with plastic tool m/s2 3)||4.7|
|Vibration value, right with metal tool m/s2 3)||5.5|
|Vibration value, right with plastic tool m/s2 3)||3.8|
|Vibration value, left with metal tool m/s2 3)||5.5|
|Total length cm 4)||170|
|Power output kW/bhp||0.8/1.1|
|Cutting diameter mm||420|
|Weight kg 5)||5.2|
|Tank volume l||0.34|
|Standard cutting tool||AutoCut C 26-2|
1) Without fuel, cutting tool and without protection
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) Without cutting tool
5) without cutting tool and deflector
The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.
The reviews you see here are written by us and our customers. As we have a physical store based here in Felthorpe, Norfolk, we deal with the public face to face daily.
Some of our customers that are not able to log onto our website and add a review for themselves still have plenty to say about our products and service.
We place only reviews to the products that have been honestly reviewed by our customers for the product that they have purchased.