STIHL TS 410 Petrol Cut-off Machine

STIHL TS 410 Petrol Cut-off Machine Review

This review covers the STIHL TS 410 Petrol Cut-off Machine in detail, focusing on its performance, standout features, core specifications, and real-world usability. You will find who it’s ideal for, a practical comparison with a closely related model, expert usage tips for fast starts and clean cuts, and a concise FAQ that answers common search queries about the TS 410.

Who the STIHL TS 410 Petrol Cut-off Machine is for

The STIHL TS 410 suits professionals and serious users who value low-vibration cutting, reliable starting, and clean operation with minimal on-site maintenance. It’s a strong match for contractors in masonry, landscaping, utilities, and roadwork who want a compact, well-balanced 300 mm cutter that delivers precise guidance by hand and integrates seamlessly with a cart when long, straight cuts are required. Teams that prioritise ergonomic handling, efficient fuel use, and consistent power will appreciate how the TS 410 streamlines daily cutting tasks.

Key features

Long-life air filtration with cyclone pre-separation: The multi-stage system routes intake air to spin off coarse particles before they reach the filter. By removing most dust at the first stage, it significantly extends filter service life and reduces on-site filter attention, supporting uninterrupted work.

Extremely low vibration (3.
9 m/s²): Buffer and spring elements in the anti-vibration system limit transfer to the handles. Low vibration enhances comfort, helps maintain control along marked lines, and supports productivity over extended sessions.

High-performance 2-MIX engine with stratified charge: The engine is designed for efficient combustion and strong torque while reducing fuel consumption and exhaust emissions. It meets stringent EU Stage V requirements and maintains power even under demanding loads.

ElastoStart, primer pump, and decompression valve: Starting is smooth and quick. The ElastoStart system moderates pull force, the manual fuel pump reduces the number of starting strokes after breaks, and the decompression valve eases the initial pull by venting pressure in the cylinder.

Compact design and optimised balance: The cutter’s form factor supports excellent guidance and precise line tracking. The ergonomic handle gives a firm, confident grip for controlled cuts both freehand and along guides.

300 mm cutting wheel compatibility: The TS 410 is configured for a 300 mm cutting disc and is supplied with an abrasive wheel so you can get to work immediately.

Water connection for dust binding and cooling: A dosable water supply on the machine helps bind dust at the source and cools the cutting wheel, promoting cleaner cuts and a clearer line of sight.

Semi-automatic belt tensioning: A simple tensioning procedure keeps the drive belt at a consistent setting, helping extend the service life of both belt and bearings while preserving performance.

Bayonet filler cap: A tool-free cap enables quick, secure refuelling to keep momentum on the job.

Flexible use by hand or with the FW 20 cart: Make fast adjustments between precise handheld work and long, straight cuts by pairing the TS 410 with the FW 20 cart when required.

STIHL TS 410 Petrol Cut-off Machine specifications

• Displacement: 66.
  7 cm³
• Power: 3.
  20 kW
• Engine power: 4.
  40 HP
• CO2: 747 g/kWh
• Device weight without refuelling: 9.
  6 kg
• Cutting disc diameter: 300 mm
• Max. cutting depth: 100 mm
• Device length with cutting disc: 67.
  5 cm
• Sound pressure level: 98 dB(A)
• Sound power level: 109 dB(A)
• K-value (sound pressure level): 2 dB(A)
• K-Factor (sound power level): 2 dB(A)
• Vibration level, left: 3.
  9 m/s²
• Vibration level, right: 3.
  9 m/s²

STIHL TS 410 Petrol Cut-off Machine vs similar models

The STIHL TS 410 stands out for its compact handling, low vibration, and efficient 2-MIX engine with stratified charge, making it an appealing 300 mm choice for accuracy-focused work and frequent on/off use. In the same family, the STIHL TS 420 is a closely related alternative often selected by crews with different cutting requirements. While both are designed for professional reliability and ergonomic control, users who emphasise a lightweight feel, confident guidance, and fast starting convenience frequently favour the TS 410. Those tailoring tool choices to varying site demands may consider the TS 420 alongside the TS 410 to align the cutter to specific job profiles while maintaining a familiar operating experience.

Usage tips

• Prime before starting: After longer breaks, actuate the manual fuel pump several times to reduce starting strokes and speed up ignition.
• Open the decompression valve: Engage it before pulling the starter to reduce resistance and protect the starting system.
• Use ElastoStart smoothly: Apply steady, controlled pulls for consistent starts, especially in cooler conditions.
• Leverage the water connection: Meter the on-tool water supply to bind dust and cool the wheel for cleaner, straighter cuts and improved visibility.
• Tension the belt semi-automatically: Re-tension as needed to maintain drive efficiency and extend belt and bearing life.
• Keep air pathways clear: The cyclone pre-separation manages coarse dust effectively; maintain the system per guidance to support long filter life.
• Select the right wheel: Use a quality 300 mm disc suitable for the material being cut, and check condition before each job.
• Use the FW 20 cart for long cuts: Switch to the cart for straight, repeatable passes and consistent depth along longer lines.
• Refuel confidently: The bayonet filler cap enables fast, tool-free refuelling so you can turn around quickly between tasks.

Frequently asked questions

What size disc does the STIHL TS 410 use?

The STIHL TS 410 is designed for a 300 mm cutting wheel and is supplied with an abrasive disc so you can begin cutting right away.

What is the cutting depth of the STIHL TS 410?

The maximum cutting depth is 100 mm.

How much does the STIHL TS 410 weigh?

The device weight without refuelling is 9.
6 kg.

Does the STIHL TS 410 have a water connection?

Yes. A dosable water connection on the machine provides a steady supply for dust binding and wheel cooling during cuts.

Is the STIHL TS 410 supplied with a cutting wheel?

Yes. It is supplied with an abrasive cutting wheel.

How does the STIHL TS 410 make starting easier?

It combines ElastoStart, a manual fuel pump to reduce starting strokes, and a decompression valve that vents cylinder pressure so the starter pull requires less effort.

What are the vibration levels of the STIHL TS 410?

The vibration level is 3.
9 m/s² on both the left and right sides.

Can the STIHL TS 410 be used with a cart?

Yes. It can be operated by hand or paired with the FW 20 cart for guided, long, straight cuts.

Does the STIHL TS 410 have an anti-vibration system?

Yes. Buffer and spring elements reduce vibration transmission to the handles for more comfortable, precise cutting.