The Climber 922 is a hydrostatic ride-on brush cutter. It is equipped with a diff- lock and front parking brakes and it is ideal for mowing high grass and overgrown neglected areas. The machine is especially suited for use on steep slopes and banks due to its low centre of gravity and wide wheelbase. With a high performance Briggs & Stratton 18HP engine, the Climber 9.22 can perform these tasks safely,quickly and efficiently. The machine is ideal for working in the countryside, agriculture, or in the maintenance of both professional and domestic gardening. Its extreme maneuverability, smooth drive and high work rate make the Grillo Climber 9.22 an extremely rapid and efficient machine whilst at the same time being very easy to use.
The single blade cutter deck has a working width of 91 cm. The structure of the whole cutter deck is designed to be shock-resistant. The blade shaft has a large diameter and the robust drive train ensures reliability in the most demanding of situations. The cutter blade is made from a special type of steel having low-noise levels, and is fitted with two reversible swing tip blades (sharpened on both sides so that they can be reversed once they are worn) which protect the shaft in case of striking unseen objects. The cutter deck also has protective side openings which can be raised for easy maintenance and cleaning.
Grillo Climber 9.22 is a compact sized machine, with a low center of gravity and optimal weight distribution, built to obtain maximum stability under most conditions and allowing maximum security for the operator in working areas where there are slopes. A low positioned padded seat with arm rests gives increased safety to the operator, whilst the low mounted,vertical crank engine which is positioned over the drive unit, the centrally positioned cutter deck, exactly between the 4 wheels, as well as the tank and battery located over the front axle, makes the machine extraordinarily stable.
The front pivoting axle and wheels with tractor profile tyres ensure grip on uneven slippery terrain. On steep slopes the Climber 9.22 will climb with maximum safety and stability. In order to further increase operator safety downhill, the Climber 9.22 has been fitted with front drum brakes which are pedal operated; and used in conjunction with the differential lock permit a high degree of traction.
The extremely small turning circle of only 38 cm allows you to work in narrow confines. The low height clearance makes the Climber ideal for mowing under trees, bushes etc. A powerful, professional 18hp Briggs & Stratton twin cylinder engine guarantees, together with a robust chassis and reliable transmission, high performance even for the most demanding professional operators. The Climbers front tyres have had anti-puncture treatment making work possible in the most hostile of places!
The transmission consists of a hydrostatic unit and a pedal operated diff- lock. The hydrostatic transmission of the Climber 9 series is unique in its class! Apart from the cooling system fan it is also fitted with a copper coil ensuring optimum oil cooling. Furthermore the transmission incorporates a high performance pump giving the Climber 9.22 optimal performance even in the most demanding situations. The hydrostatic transmission is positioned to the side of the engine, and not below it, to help obtain low oil temperature. This positioning avoids warm air from the engine and so subsequent contact with the hydrostatic transmission has been avoided.
The engagement of the blades is made via an electric push-button positioned near the steering wheel. The cutting height, from 30 to 90 mm can be adjusted from the driver’s seat by means of a lever which has 4 cutting positions; the same lever has a position for transfer allowing you to lift the whole cutter deck from the ground. The blade rotation is interrupted automatically in order to negotiate road kerbs. The cutter deck’s belt tension is self-adjusting. The whole cutter deck is always kept parallel to the ground improving the cut quality even after many years of intensive use.
The Climber 9.22 is an extremely comfortable machine! Its extraordinary operator space is obtained by having very low and long foot-rests. The operators feet lean towards the best angle giving them maximum safety. The drive lever and steering wheel are both smooth in operation. The adjustable and dampened seat is fitted with armrests that ensure greater safety for the operator when working on slopes. The Climber 9.22s driving position will not fatigue the operator even after extended periods of work!
The Climber 9.22 is fitted with an 18 HP Briggs & Stratton Intek V-Twin professional petrol engine, with electric start. Its twin cylinder overhead valve design has cast iron liners with a displacement of 656 cc. It incorporates the latest cutting edge technology to ensure reliability, low emissions, reduced consumption, high performance and low vibration levels. The air filter is easily accessible for fast and easy cleaning. The fuel tank is positioned over the front axle, has a 13 ltr capacity and is equipped with a reserve tank for extended work on slopes. The “Grillo Super Silent” exhaust of the 9.22 was designed by Grillo in order to reduce noise emission and offer minimal exhaust resistance.
|Engine|| Briggs & Stratton 7220 Professional Series V-Twin
Start electric, with 12 V battery
Displacement 656 cc, 2 Cylinders
Power 18 HP (13.2 kW) – Gross power 22 HP
Dry air filter
|Fuel tank capacity||Fuel tank 13 litres (reserve tank 3 litres)|
|Gearbox||hydrostatic transmission with reduction gear unit and diff|
|Clutch||Clutch: electromagnetic for PTO with blade brake|
|Cutter deck||Side/rear discharge|
|Cutting configuration||1 rotating blade|
|Cutting width||91 cm|
|Cutting height||4 different cutting positions from 3 to 9 cm plus 1 for transfer|
|Differential locking||Differential locking device by pedal action|
|Front tyres||Tractor 13×5.00-6 wheels|
|Rear tyres||Tractor 17×8.00-8 wheels|
|Speed||Continuously variable from 0 to 10 km/h, reverse gear from 0 to 6 km/h|
|Inner turning radius||38 cm|
|Seat||Seat equipped with springs, adjustable, with arm-rests and roll bar|
|Service brake||On the front wheels brakes are pedal-operated|
|Parking brake||On the rear wheels brakes are lever-operated|
|Mowing capacity per hour (indicative)||7200 m^2/h|
The reviews you see here are written by us and our customers. As we have a physical store based here in Felthorpe, Norfolk, we deal with the public face to face daily.
Some of our customers that are not able to log onto our website and add a review for themselves still have plenty to say about our products and service.
We place only reviews to the products that have been honestly reviewed by our customers for the product that they have purchased.